Commercial Fryer Service and Repair Specialists
We Repair all Commercial Fryers, Natural Gas, LPG & Electric.
"Our Priority is to keep your equipment in service. We attend site quickly, diagnose the fault and if possible repair the fault from van stock, and leave your equipment working."
Key reasons to use Catercare:
- We have fast response times
- Our engineers are highly skilled, qualified and experienced
- We offer competitive pricing
- We provide bespoke services designed specifically for you
- We are Gas Safe Registered
- We are F-Gas Certified
- We are CCEECC Trained
- All our engineers are DBS enhanced checked
- We carry out due diligence for health & safety and environmental health
- We provide risk assessments & method statements
- We are CHAS Premium Plus accredited (Contractor Health and Safety Assessed)
Energy Saving Tips & Trouble Shooting
Make your oil taste better and last longer, maintaining your oil is the key to producing great tasting food and if you do it properly you can extend the life of the oil significantly. There are three contributing factors to the breakdown of your oil.
- Hydrolysis: - when water finds its way into the oil
To help avoid adding water into the oil do not fill the basket directly over the fryer tank, especial frozen food as the ice will fall into the tank
2. Polymerization: - when food particles compound and bond together to speed up the breakdown
Again do not load the basket over the tank and give the basket a shake before to remove any loose food particles, also when seasoning do it away form the tank as salt is a polymerization agent. Invest in a fryer filter to help remove any food particles and filter regularly
3. Oxidation: - contact with air
Try to cover the tank as much as possible to minimise the contact the oil has with air
Helpful tip - The pilot light will not stay lit
One of three things could cause this,
1. faulty hi-limit thermostat
2. thermopile
3. gas safety valve
Our maintenance schedule
Dish and glass washers
- Dismantle and checked the inlet valve/filter mesh and the working condition of the heating element.
- Carry out visual check on internal wiring & control panel switches.
- Test and clean if necessary, all wash and rinse jets.
- Inspect the condition of internal filters and water softener.
- Test the operation of door safety switch.
- Calibrate wash and rinse temperature.
- Test all chemical dosing pumps.
- Inspect wash arm bearings.
- Carry out earth and insulation resistance test.
Gas equipment
- Dismantle and grease the taps.
- Clean the burners and venturis.
- Check and adjust gas pressure as necessary and adjust gas burner pressures.
- Inspect the condition of the thermocouples & calibrated thermostats.
- Inspect all controls are in working order.
- Inspect the condition of the door seals.
- Carry out a soundness test.
Electric ovens
- Checked the operation of the control panel switches.
- Carry out a visual check of internal wiring and connectors.
- Carry out an earth continuity and insulation resistance tests.
- calibrate thermostats.
- Inspect the condition of the door seals.
- Carry out a soundness test.
Hot cupboards and gantries
- Test the operation of heater controls.
- Test heat lamps.
- Carry out a visual check of internal wiring.
- Inspect the general condition of doors & castors.
- Carry out an earth continuity and insulation resistance test.
Small electrical appliances
- Test the operation of safety devices.
- Inspect bearings and blades where necessary.
- Test the operation of the control panel switches.
- Carry out a visual inspection of internal wiring and connectors.
- Carry out an earth continuity and insulation resistance tests.
Microwave ovens
- Carried out a radiation leakage tests & power test.
- Inspect the condition of the roof liner & base plate.
- Remove, clean and inspect the condition of the air filter.
Water boilers
- Test the operation of the thermostats.
- Remove loose lime scale.
- Test the operation of the control panel switches.
- Carry out a visual inspection of internal wiring and connectors.
- Carry out an earth continuity and insulation resistance tests.
- Inspect water treatment facilities.
Amika | Alto-Sham | Blodget | Blue Seal | Bravilor | Bonamat | Buffalo | Burco | Cater-Wash | Caterlite | Chefsrange | Classeq | Convotherm | DC | Derby Electrolux | Falcon | Friulinox | Frymaster | Garland | Hatco | Hobart | Houno | Imperial | Inomak | Instanta | Kenwood | King Edward |KitchenAid | LEC | Lainox | Lincat | Maidaid | Maestrowave | Marco | Meiko | Menumaster | Mercatus | Merrychef | Metcalf | Moffat | Nelson | Panasonic | Parry | Pitco Promek | Rational | Robot Coupe | Roller Grill | Rowlett Rutland | Samsung | Sharp | Sammic | Simag | Sirman | Thor | Valentine | Victor | Winterhalter
AHT | Arcaboa | Autonumis | Blizzard | Cambro | Caravelle | Caterlite | Cellerator | Comersa | Craven | Crystal | Derby | Designline | Electrolux | Elcold | Fagor | Foster Refrigerator | Framec | Frigoglass | Frilixa | Gamko | Genfrost | Gram | Hoshizaki | ISA | Ice-O-Matic | Iarp | IMC | Infrico | Interlevin | J E Hall | Kubus | LEC | Lifestyle | Lincat | Manitowoc | Marstair | Metro | Mercatus | Mondial Elite | Moffat | Polar | Porkka | Precision | Roller Grill | Santos | Sirman | Smeg | Tecfrigo | Tefcold | Trimco | True | Victor | Vouge | Waring | Whrilpool | Williams